The All-In-One PRV is fully adjustable from 0-15psi. Simply twist the top adjustment knob to increase or decrease the pressure inside your fermenter. This allows for use with everything from pressure fermenting, spunding, carbonating or even pressure transfers to kegs. Brew smarter, not harder.
Fits CF5
Our custom Spike bracing shelf is made in the USA and is a recommended addition when casters or leg extensions are installed for additional stability. Our bracing shelf will also come in handy as a storage shelf for blowoff buckets, tools and more.
Specs:
-304SS
-Super thick 14ga material
-Made in the USA
The long leg extensions were specifically designed to bring the racking port to a height where the conical can be gravity drained into a 5 gallon corny keg.
*We recommend a standard bracing shelf when using the leg extensions for added stability*
Fits CF10 and CF15!
Our custom Spike bracing shelf is made in the USA and is a recommended addition when casters or leg extensions are installed for additional stability. Our bracing shelf will also come in handy as a storage shelf for blowoff buckets, tools and more.
Specs:
-304SS
-Super thick 14ga material
-Made in the USA
This USA made blow off cane is designed to attach to the 1.5" TC on the lid of our conicals.
Options:
Standard: For use as a standard blow off into sanitizer
1.5" TC End: Use for a blow off into sanitzer with a barb and/or attach our pressure manifold.
Specs:
-1.5" TC
-304SS
-15” total drop
-Works with every size conical
-Made in the USA
Our specially designed CO2 gas manifold is designed to attach directly to the 1.5" TC port on your fermenter's lid. This manifold allows you to easily add pressure for transfers, stuck yeast dumps, purging oxygen, carbonating, etc. The manifold has 3 ports for a pressure gauge, pressure relief valve and a ball lock gas post. One part, three functions, easy assembly, easy cleaning; what more could you ask for!?
Gas Manifold Bundle:
-Gas Manifold
-Pressure Gauge
-PRV
-Gas Post
Probably the coolest add-on for your new FLEX or Conical! We've heard many brewers who have switched from clear carboys to stainless and they only have one complaint; I can't see my beer fermenting any more! Brewers are curious by nature and we're not ones to stop that curiosity so here is our solution to that problem.
Not all hose barbs are created equal! Our special 2" TC x barb fitting features a shorter profile and over sized diameter barb. The over sized barb (5/8" OD) is specially designed for 1/2" Silicone tubing. The larger size does two things:
1) It stretches the tubing over the barb creating a tight fit requiring no hose clamps.
Tri-Clover Clamp 2" End Cap
Clean In Place Ball
Another cool innovation from the Spike engineers; our low pressure CIP ball! We wanted to design a CIP ball that didn’t require home brewers to purchase another pump if they already owned one. Small brewery pumps, like the Chugger pumps used on our Spike System, are very common for most home brewers. However, most CIP balls require a much larger pump to work properly. This CIP ball was specifically designed to work with a the 7GPM Chugger pump. It has also been tested with larger sump pumps which are also commonly used for CIP applications.
